Build a Hexagon Dining Table

An Easy to Build Table

Here is a nifty table that doesn’t take up a lot of space yet you can seat more people… These free furniture plans to build a Hexagon Dining Table are simple to follow and won’t break your budget. Finished in a variety of options, this table will be a hit at the family dinner or even the next dinner party!

free furniture plans build hexagon dining table_Copy

Materials:

  • 1-1/4″ pocket hole screws
  • 1-1/4″ brad nails
  • Edge banding, optional (<– affiliate link!)
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)

Lumber:

  • 4 – 1×3 at 8′
  • 2 – 2×2 at 6′
  • 1 sheet of 3/4″ plywood

Cut List:

  • 6 – 2×2 at 29-1/4″ – Legs
  • 2 – 1×3 at 24-3/4″ – Aprons
  • 2 – 1×3 at 43″ – Aprons
  • 2 – 1×3 at 25-1/4″ – Top Supports
  • 2 – 1×3 at 11-3/8″ – Stretchers
  • 4 – 1×3 at 25-3/4″ – Angled Aprons
  • 1 – 3/4″ plywood at 48″ x 55-1/2″ – Top

 free furniture plans build hexagon dining table

Notes:

Edge banding will be applied to the exposed edges of the plywood prior to assembly.

 

Step One

Cut the pieces for the legs. Cut the taper using a jigsaw, bandsaw, or tapering jig on the table saw.

 free furniture plans build hexagon dining table_Legs

Step Two

Cut the pieces for the aprons. With the pocket hole jig set for 3/4″ material, drill pocket holes in each end of the apron pieces. Assemble the table frame as shown – the tapers of the legs will face each other at the shorter sides – using glue and 1-1/4″ pocket hole screws. The outside face of each apron will be flush with the outside face of the legs.

 free furniture plans build hexagon dining table_Aprons

Step Three

Cut the pieces for the center supports and drill pocket holes at each end. Secure to the longer stretchers using glue and 1-1/4″ pocket hole screws.

 free furniture plans build hexagon dining table_Top Supports

Step Four

Cut the pieces for the stretchers and drill pocket holes at each end. Secure the stretchers to the outside of the longer aprons as well as the two remaining legs using glue and 1-1/4″ pocket hole screws. The taper for the legs will face in toward the long stretchers.

 free furniture plans build hexagon dining table_Legs 2

Step Five

Cut the pieces for the angled aprons. I have given the measurement as well as the degree for each angle. When attaching to the table frame, the 30 degree angled side will attach to the leg with the short stretcher and the 60 degree angled side will attach to the corner leg. Attach the aprons with glue and 1-1/4″ brad nails.

 free furniture plans build hexagon dining table_Angled Aprons 1

free furniture plans build hexagon dining table_Angled Aprons 2

Step Six

Cut the piece for the top. Spread glue along the top supports, the aprons, the stretchers, and the legs and position the top so that it overhangs by 1″ on all sides. Secure to the frame using glue and 1-1/4″ brad nails.

 free furniture plans build hexagon dining table_Top 1

free furniture plans build hexagon dining table_Top 2

Finish as desired!

Have questions about the free furniture plans to build a Hexagon Dining Table? Leave a comment below!

Originally posted 2014-01-10 08:00:32.

13 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.