Plans to Build a File Cabinet

An Easy to Build Cabinet for the Home Office!

Free furniture plans to build a file cabinet that is easy to build and totally customizable. The depth should stay the same but the length can be increased to fit your needs! Click on the drawings to enlarge them!

Free Furniture Plans to Build a File Cabinet

Materials:

  • 1-1/4″ pocket hole screws (<– affiliate link!)
  • One sheet of 3/4″ plywood
  • Edge banding to match the 3/4″ plywood (<– affiliate link!)
  • One half sheet of 1/2″ plywood
  • One half sheet of 1/4″ plywood
  • Two – 1/8″ x 1/2″ x 36″ strips of aluminum
  • Four 1/4″ nylon spacers
  • Four 1″ screws to mount the aluminum
  • Four sets of 14″ drawer slides (ball bearing 3/4 extension)
  • Four drawer handles

Tools:

  • Table saw, jigsaw or circular saw
  • Drill
  • Kreg jig and 1-1/4″ pocket hole screws
  • Brad nailer and 1-1/4″ brad nails
  • Square and pencil

Cut List:

  • Two – 3/4″ plywood @ 15″ x 48″ – Sides
  • One – 3/4″ plywood @ 18″ x 48″ – Back
  • One – 3/4″ plywood @ 14-1/4″ x 16-1/2″ – Bottom
  • One – 3/4″ plywood @ 4-7/8″ x 16-1/2″ – Kick Plate
  • Two – 3/4″ plywood @ 2-1/2″ x 16-1/2″ – Interior Supports
  • Two – 3/4″ plywood @ 6-1/2″ x 17-3/4″ – Smaller Drawer Fronts
  • Two – 3/4″ plywood @ 15-1/4″ x 17-3/4″ – Larger Drawer Fronts
  • Four – 1/2″ plywood @ 5-1/2″ x 15-1/4″ – Smaller Drawer Boxes
  • Four – 1/2″ plywood @ 5-1/2″ x 13″ – Smaller Drawer Boxes
  • Four – 1/2″ plywood @ 13″ x 15-1/4″ – Larger Drawer Boxes
  • Four – 1/2″ plywood @ 13″ x 13″ – Larger Drawer Boxes
  • Four – 1/4″ plywood @ 14″ x 15-1/4″ – Drawer Bottoms

Edge banding should be applied to all exposed edges before assembly.

Step One

Cut the pieces for the sides and the back. Drill pocket holes for 3/4″ material in the top of the sides, as well as one long edge at the back. Also drill pocket holes in the top edge of the back. Remember, there will be a right and left! Attach the sides to the back using glue and pocket hole screws.

Free Furniture Plans to Build a File Cabinet_Back

Step Two

Cut the piece for the bottom. Drill pocket holes in the edges to attach the bottom to the sides and back. Use glue and pocket hole screws to secure the bottom to the sides and back as shown.

Free Furniture Plans to Build a File Cabinet_Bottom

Step Three

Cut the piece for the kick plate. Drill pocket holes in each end of this piece and attach to the sides of the cabinet. The top of the kick plate will be flush with the top face of the bottom piece.

Free Furniture Plans to Build a File Cabinet_Kick Plate

Step Four

Cut the piece for the top. Attach the top to the sides and back using glue and pocket hole screws through the pocket holes at the top of the sides and back into the top.

Free Furniture Plans to Build a File Cabinet_Top

Step Five

Cut the pieces for the inner supports. Drill pocket holes in each end. Attach to the sides as shown with glue and pocket hole screws.

Free Furniture Plans to Build a File Cabinet_Interior Supports

Step Six

Cut the pieces for the drawer boxes. They can be assembled using glue with pocket holes (for 1/2″ material), brad nails, or countersunk screws. I used glue and brad nails to assemble the drawers for my file cabinet. Attach the bottom using glue and brad nails.

Free Furniture Plans to Build a File Cabinet_Drawer Boxes

Step Seven

Attach the drawer hardware according to the manufacturer’s instructions. The dimensions shown on the drawing are to the bottom of the smaller upper drawers, and the middle of the larger lower drawers.

Free Furniture Plans to Build a File Cabinet_Drawer Slide Placement

Step Eight

Cut the pieces for the drawer fronts. There will be a 1/8″ gap between the fronts to allow the drawers to freely open and close. FTake a look at this tutorial on installing drawer fronts.

Free Furniture Plans to Build a File Cabinet_Drawer Fronts

Step Nine

To attach the aluminum strips for the file folders, cut the strips into four 13″ long pieces. Pre-drill a hole in each end of the strip and attach the strips with the 1″ pan head screws each through a spacer into the larger drawer boxes.

Free Furniture Plans to Build a File Cabinet_SANY1257

 

Free Furniture Plans to Build a File Cabinet_SANY1259

Free Furniture Plans to Build a File Cabinet_SANY1260

Finish the file cabinet as desired. Have any questions about the free furniture plans to build a file cabinet? Leave a comment below!

Originally posted 2012-09-04 08:00:25.

12 Comments

Leave a Reply to Elona Earley Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.