Use a Wet Tile Saw to Cut Tile

A Few Tips on How Use a Wet Tile Saw

Installing tile is very simple but what about the areas where the tile needs to be cut? There are several ways to cut tile and I’ll share a few tips on how to use a wet tile saw!

how to use wet tile saw IMG_20140205_165828_092

Don’t worry – I’m not going to try to sway you into buying an expensive piece of equipment. A tile saw can be rented by the day at some home improvement stores. I did purchase mine. It is what is referred to as a “disposable” saw, meaning that it is really only meant to be used a few times then tossed. I look at it this way: if I were a contractor who installed tile for a living, then I would want a more expensive saw but since I’m not, this saw is perfect for me. I paid $50 for the saw at Home Depot (then bought a better blade <– affiliate link!) and know that if used correctly, this saw will last a long time! I keep it in an old ammunition box which doubles as a stand!

how to use wet tile saw IMG_20140205_164439_182

Let’s start with safety… Even though the blade isn’t sharp, per se, safety glasses and gloves are still a good idea. A wet tile saw uses water to keep the blade cool when cutting through the tile and it sprays everywhere – I mean everywhere – and you certainly don’t want that in your eye! A mask is also a good idea. I did not wear one and ended up with tile dust all over my chin. It was pretty hilarious! If it is cold outside, you’ll need something to protect your clothing from getting wet. Let me introduce the latest in Hefty Bag fashion…

how to use wet tile saw IMG_20140205_141155_596

Yes, I cut holes for my head and arms in a trash bag and wore it. It was a whopping 28° the day we installed the tile and I was already cold. I didn’t want to be wet, too! It worked, by the way, my jacket was nice and dry!

So when it comes time to cut the tile, it is easier to make a pencil line where the tile is to be cut rather than use the fence as a guide as you would with lumber then run it through the saw. I got pretty good at holding the blade guard up with one finger so I could see the line on the tile.

how to use wet tile saw IMG_20140205_164520_987

Don’t push the tile through the blade! Just hold the piece and guide it so that the blade cuts along the line.

how to use wet tile saw IMG_20140205_164501_467

If notches need to be cut, I find it easy to draw lines on my tile, then cut the excess out. If it is a notch in the middle of a piece (sort of a U shape), I make short cuts into the area that I need to remove. Sure, it may look bad but this is usually for an area that will be hidden by a switch plate or outlet cover and no one will see it!

how to use wet tile saw IMG_20140206_094453_747

Make sure you check the water tray frequently. If it runs out of water, it could damage the blade, the saw, and the tile.

how to use wet tile saw IMG_20140205_165836_651

So there you have it – a few tips on how to use a wet tile saw. Super-easy, right? If you have any questions please contact me at cher {at} designsbystudioc {dot} com or leave a comment below!

Originally posted 2014-02-25 08:00:16.

10 Comments

Leave a Reply to Jessica F. Hinton Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.