Another Rustic and Industrial Media Stand with Lots of Storage
Hey there! The rustic and industrial vibe is all the rage right now, and guess what? It’s super easy to achieve! You won’t believe how many cool ways there are to make new boards look old. And if you’re looking for a fun project to try out this technique, look no further than the DIY furniture plans for the Ironton Media Console! This awesome stand has it all – four drawers, a cubby with a door and a shelf behind it, an open shelf area, and the best part? It’s on heavy duty casters! So you can move it around with ease. Trust me, this project is a winner!
The DIY furniture plans to build an Ironton media console are suitable for all skill levels, and a fabulous weekend project!
Materials:
- 1-1/4″ pocket hole screws
- 1-1/4″ brad nails
- Edge banding, optional
- 4 sets of 14″ drawer slides (<– affiliate link!)
- 1 set of hinges
- 1 magnetic catch for the door
- Cabinet pulls
- 4 – 4″ heavy duty casters
- Wood glue
- Sandpaper (100, 150, 220 grits)
- Finishing supplies (primer & paint, or stain, sealer)
Lumber:
- 1 – scrap of 1×2 at 15″ (can also be cut out of plywood!)
- 3 – 1×6 at 8′
- 2 – 4′ x 8′ sheets of 3/4″ plywood
Cut List:
- 2 – 3/4″ plywood at 15-1/4″ x 16″ – Sides
- 1 – 3/4″ plywood at 16″ x 52-1/2″ – Bottom
- 1 – 3/4″ plywood at 14-1/2″ x 52-1/2″ – Back
- 2 – 3/4″ plywood at 14-1/2″ x 15-1/4″ – Larger Dividers
- 1 – 1×2 at 15″ – Drawer Divider
- 1 – 3/4″ plywood at 15-1/4″ x 21″ – Center Shelf
- 1 – 3/4″ plywood at 14-1/4″ x 15″ – Cubby Shelf
- 1 – 3/4″ plywood at 6-7/8″ x 15-1/4″ – Smaller Divider
- 1 – 3/4″ plywood at 17″ x 56″ – Top
- 2 – 3/4″ plywood at 7-5/8″ x 12-1/2″ – Smaller Drawer Box Bottom
- 4 – 1×6 at 12-1/2″ – Smaller Drawer Box Sides
- 4 – 1×6 at 9-1/8″ – Smaller Drawer Box Front & Back
- 2 – 3/4″ plywood at 12-1/2″ x 12-1/2″ – Larger Drawer Box Bottom
- 4 – 1×6 at 12-1/2″ – Larger Drawer Box Sides
- 4 – 1×6 at 14″ – Larger Drawer Box Front & Back
- 2 – 3/4″ plywood at 6-5/8″ x 9-7/8″ – Smaller Drawer Fronts
- 2 – 3/4″ plywood at 6-5/8″ x 14-3/4″ – Larger Drawer Fronts
- 1 – 3/4″ plywood at 14-1/4″ x 14-3/4″ – Door
Step One
Edge banding will be applied to the exposed edges of the plywood prior to assembly.
Cut the pieces for the sides and the bottom. With the pocket hole jig set for 3/4″ material, drill pocket holes in each end of the bottom piece. Secure the sides to the bottom using glue and 1-1/4″ pocket hole screws.
Step Two
Cut the piece for the back and drill pocket holes in each end, as well as the bottom edge. Secure the back to the sides and bottom using glue and 1-1/4″ pocket hole screws.
Step Three
Cut the pieces for the larger dividers. Drill pocket holes in the bottom edge and the back edge, treating each piece as a left and a right so that the pocket holes are not visible in the open shelf. Secure the dividers to the bottom and the back using glue and 1-1/4″ pocket hole screws.
Step Four
Cut the piece for the drawer divider and drill pocket holes in each end. Secure the divider to the side and one of the larger dividers using glue and 1-1/4″ pocket hole screws. Orient the piece so the pocket holes face down and will not be visible.
Step Five
Cut the piece for the center shelf and drill pocket holes in each side edge as well as the back edge. Secure the shelf between the larger dividers using glue and 1-1/4″ pocket hole screws.
Step Six
Cut the piece for the cubby shelf and drill pocket holes in each side edge as well as the back edge. Secure the shelf between the side and larger divider using glue and 1-1/4″ pocket hole screws. The shelf will be positioned 1″ back from the front edges of the side and divider.
Step Seven
Cut the piece for the smaller divider and drill pocket holes in one long edge. Secure the divider to the center shelf as shown using glue and 1-1/4″ pocket hole screws. Add a few brad nails through the back into the back edge of the smaller divider.
Step Eight
Cut the piece for the top. The front and sides of the top will overhang by 1″. Secure the top in place using glue and 1-1/4″ brad nails.
Step Nine
Cut the pieces for the drawer boxes. Drill pocket holes in all four edges of the bottom as well as each end of the sides. Assemble the drawer boxes as shown using glue and 1-1/4” pocket hole screws. Install the drawer slides according to the manufacturer’s installation instructions, locating them ¾” back from the front edge of the sides. Check out this easy tutorial about installing drawer slides – it will be very helpful! Make any necessary adjustments.
Step Ten
Cut the pieces for the drawer fronts. Mark the position for the drawer pulls and drill the holes. Shim the drawer front in the opening – there will be a 1/8” gap around all sides – then drive screws through the holes for the drawer pulls into the drawer box. Open the drawer, and secure the drawer front using countersunk 1-1/4” screws from the inside. Remove the screws from the holes for the drawer pull then finish drilling the holes. Install the drawer pull. Read this easy tutorial on installing drawer fronts for helpful hints!
Step Eleven
Cut the piece for the door. There will be a 1/8″ gap around all sides of the door in the opening. Install the hinges on the door, then install the door in the opening. Install a magnetic catch to hold the door closed.
Finish as desired.
As mentioned before, the media console would be fabulous with an old and weathered finish. The console would also look fantastic painted with a high-gloss finish! Any questions about the DIY furniture plans to build an Ironton Media Console? Leave a comment below!
Originally posted 2014-11-13 08:00:13.
Comments are closed.