Unlock Your DIY Skills: Build Your Own Dining Table with Step-by-Step Plans

Wow, this table is absolutely stunning! With its charming rustic leg bases and spacious top, you can create a gorgeous table perfect for hosting a big family gathering or an unforgettable dinner party by following the Shelby Dining Table plans, suitable for all skill levels!

 shelby dining table plans_Copy

Materials:

  • 2-1/2″ pocket hole screws (<– affiliate link!)
  • 1-1/4″ brad nails
  • 2″ screws
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)

Lumber:

  • 3 – 1×2 at 8′
  • 1 – 1×4 at 8′
  • 7 – 2×4 at 8′
  • 1 – 4×4 at 6′
  • 1 sheet of 3/4″ plywood

Cut List:

  • 2 – 4×4 at 30-1/4″ – Base Post
  • 16 – 2×4 at 18″ – Base Legs
  • 8 – 1×4 at 8″ – Base Leg Feet
  • 16 – 2×4 at 17-11/16″ – Angled Supports
  • 1 – 3/4″ plywood at 40-1/2″ x 89″ – Top
  • 2 – 1×2 at 40-1/2″ – Top Trim
  • 2 – 1×2 at 90-1/2″ – Top Trim

 shelby dining table plans

Handcrafted with You in Mind!

Join the DbSC community and never miss a project or sale!

* indicates required

Click on the drawings for a larger view!

Step One

Cut the pieces for the base posts, the legs, and the feet. With the pocket hole jig set for 1-1/2″ material, drill pocket holes in one end of each leg piece. Use a sander and coarse sandpaper to sand a rounded edge on the opposite side at the opposite end of the pocket holes.

Secure the 1×4 feet on the bottom of eight of the legs using glue and 1-1/4″ brad nails. These will be the lower legs. Secure the lower legs to the posts locating them 3/4″ up from the bottom of the posts using glue and 2-1/2″ pocket hole screws.

 shelby dining table plans_Legs

shelby dining table plans_Lower Legs

Step Two

Secure the upper legs to the posts using glue and 2-1/2″ pocket hole screws. The back face of the legs will be flush with the top face of the posts.

 shelby dining table plans_Upper Legs

Step Three

Cut the pieces for the angled supports and cut a 45 degree angle in each end. Secure to the posts and legs as shown using glue and toenailed 2″ screws.

 shelby dining table plans_Angled Supports 1

shelby dining table plans_Angled Supports 2

Step Four

Cut the pieces for the top and the top trim. The trim will be secured to the edges of the top using glue and 1-1/4″ brad nails. One edge of the trim pieces will be flush with the top face of the table top.

Secure the top to the bases using countersunk 2″ screws. Do not use glue! This will make it easier to move the table as needed!

 shelby dining table plans_Top

shelby dining table plans_Secure Bases

Finish as desired.

Awesome, huh? The table you can build from the Shelby Dining Table plans can be finished however you desire and if constructed using suitable materials, it would be an excellent addition for outdoor use! Contact me at cher {at} designsbystudioc {dot} com!

Originally posted 2014-03-05 08:00:58.

Author

Write A Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.