Free Plans to Build a Dining Chair (#2)

Another Easy to Build Dining Chair

Hey there! I’ve got some exciting news for you. I just released the plans for the second chair in our dining chair series, and it’s absolutely free! If you remember, I shared the plans for Dining Chair #1 earlier. Well, this new chair follows a similar construction method, but with a few cool changes. It’s a bit taller and has a unique back design. So, if you’re interested in building your own dining chair, this is definitely worth checking out!

Free Plans to Build a Dining Chair #2

Materials:

  • 1-1/4″ pocket hole screws
  • 2″ pocket hole screws
  • 2-1/2″ pocket hole screws
  • 1-1/4″ brad nails
  • Edge banding for seat, if desired (<– affiliate link!)

Lumber:

  • 1 – 2×4 at 6′
  • 1 – 1×6 at 6′
  • Scrap of 3/4″ plywood for the seat

Cut List:

  • 2 – 2×2 at 23-1/2″ – Upper Back Legs
  • 2 – 2×2 at 18-1/2″ – Lower Back Legs
  • 2 – 2×2 at 17-3/4″ – Front Legs
  • 3 – 1×3 at 15″ – Front & Back Aprons, Back Slat
  • 1 – 1×4 at 15″ – Upper Back Slat
  • 2 – 1×2 at 20-1/8″ – X
  • 2 – 1×3 at 14″ – Stretchers
  • 1 – 3/4″ plywood at 18″ x 18″ – Seat

Step One

Cut the pieces for the legs. Cut a 5 degree bevel in the bottom of each upper piece. The angle allows the back to “recline” so to speak! Drill pocket holes in the top edge only of the lower leg pieces then attach the top using glue and 2-1/2″ pocket hole screws.

Free Plans to Build a Dining Chair 2_Leg 1

Free Plans to Build a Dining Chair 2_Leg 2

Step Two

Cut the pieces for the X. The angles may have to be adjusted… The dimensions are what the program gives me and sometimes a few adjustments will need to be made. Once the pieces have been cut, assemble as shown using glue and 1-1/4″ pocket hole screws, then attach to the back using 1-1/4″ brad nails. the front face of the X will be flush with the front face of the legs.

Free Plans to Build a Dining Chair 2_X 1

Free Plans to Build a Dining Chair 2_X 2

** You may have to play with the angles on the X… I’m building this chair for another project and couldn’t get the angle right. Here’s how mine looks –

Free Plans to Build a Dining SANY1771

Cut the pieces for the back apron and the back slats.  Drill pocket holes in each end of each piece. Secure using glue and 1-1/4″ pocket hole screws. The front faces of the slats will be flush with the front faces of the legs.

Drill pocket holes in each end of the back apron. Secure the piece as shown, the outer face will be flush with the back face of the lower legs.

Free Plans to Build a Dining Chair 2_Back

Step Three

Cut the pieces for the front frame. Drill pocket holes in each end of the apron. Secure using glue and 1-1/4″ pocket hole screws. The front faces of the apron will be flush with the front faces of the legs.
Free Plans to Build a Dining Chair 2_Front Frame

Step Four

Cut the pieces for the stretchers and drill pocket holes in each end. Secure as shown using glue and 1-1/4″ pocket hole screws in the front legs and 2″ pocket hole screws in the back legs.
Free Plans to Build a Dining Chair 2_Stretchers

Step Five

Cut the piece for the seat. Cut the notches for the legs as shown and apply edge banding if desired. Secure the seat to the frame using glue and 1-1/4″ brad nails.

Free Plans to Build a Dining Chair 2_Seat 1

Free Plans to Build a Dining Chair 2_Seat 2

Finish as desired.

Have any questions about the free plans to build a dining chair (#2)? Leave a comment below!

Originally posted 2013-02-06 08:00:18.

7 Comments

Leave a Reply to Free Plans to Build a Dining Chair Bench - Designs by Studio C Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.