Build a Wide Wall Mounted Desk

DIY Wall Mounted Desk with Shelves

I love this desk… It is simple and the perfect piece with a modern touch. The DIY furniture plans to build a Wide Wall Mounted Desk feature angled sides and three cubbies under the top plus it will mount on a wall (on a 2×4 cleat screwed into studs) at any height you choose. A hole can be drilled at one end toward the back for cord management or an outlet can be added to the desk top. This quick and easy desk can be constructed out of one sheet of plywood making it a super-economical project!

DSCF4465

Materials:

  • 1-1/4″ pocket hole screws (<–affiliate link!)
  • 1-3/4″ brad nails
  • 3-1/2″ or 4″ screws
  • Edge banding (<–affiliate link!)
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)

Tools Needed:

  • Table Saw or Circular Saw
  • Jigsaw, optional
  • Drill
  • Pocket Hole Jig
  • Iron for edge banding
  • Pneumatic brad nailer with compressor
  • Sander

Lumber:

  • 1 – 4′ x 8′ sheet of 3/4″ plywood
  • 1 – 2×4 at 4′

Cut List:

  • 2 – 3/4″ plywood at 18″ x 20-1/2″ – Sides
  • 1 – 3/4″ plywood at 18″ x 41″ – Shelf
  • 1 – 3/4″ plywood at 3-3/4″ x 41″ – Back
  • 3 – 3/4″ plywood at 3-3/4″ x 15-3/4″ – Dividers
  • 1 – 3/4″ plywood at 18″ x 42-1/2″ – Top
  • 1 – 3/4″ plywood at 5-1/2″ x 41″ – Under Shelf Support
  • 1 – 2×4 at 40-1/2″ – Cleat (to hang desk)

DIY Furniture Plans to Build a Wide Floating Desk

 

Edge banding will be applied to the exposed edges of the plywood prior to assembly.

Step One

Cut the pieces for the sides. Cut the angle in the sides using a circular saw or a jigsaw.

DIY Furniture Plans to Build a Wide Floating Desk - Sides

Step Two

Cut the piece for the shelf. With the pocket hole jig set for 3/4″ material, drill pocket holes in each end of the shelf piece. Secure the shelf to the sides as shown using glue and 1-1/4″ pocket hole screws.

DIY Furniture Plans to Build a Wide Floating Desk - Shelf

Step Three

Cut the piece for the back and drill pocket holes in the side edges. Secure the back to the sides using glue and 1-1/4″ pocket hole screws. Locate the back 1-1/2″ forward of the back edge of the shelf. This will allow the desk to fit over the cleat that will be mounted to the wall. Add a few brad nails through the underside of the shelf into the lower edge of the back.

DIY Furniture Plans to Build a Wide Floating Desk - Back

Step Four

Cut the pieces for the dividers. Secure the dividers to the shelf and back using glue and 1-3/4″ brad nails.

DIY Furniture Plans to Build a Wide Floating Desk - Dividers

Step Five

Cut the piece for the top. Secure the top to the sides, back and dividers using glue and 1-3/4″ brad nails.

DIY Furniture Plans to Build a Wide Floating Desk - Top

Step Six

Cut the piece for the under shelf support. Drill pocket holes in the side edges as well as one long edge. Secure the support to the sides and shelf using glue and 1-1/4″ pocket hole screws. This piece will add support to the shelf to keep it from sagging and will also keep the sides from splaying out.

DIY Furniture Plans to Build a Wide Floating Desk - Under Shelf Support

Step Seven

Cut the piece for the cleat. The cleat will be installed on the wall using 3-1/2″ or 4″ screws through the cleat into wall studs. For maximum support, secure the cleat to at least two wall studs. Locate the cleat at the height desired minus 3/4″. Position the desk over the cleat (the cleat will fit between the top and the shelf) and secure in place using 3-1/2″ or 4″ screws through the top of the desk into the top edge of the cleat. Note that the desk is not for sitting or standing on but will support a computer, speakers, books, etc. 

This desk is perfect for a kitchen nook, dining room or entryway. Have any questions about the DIY furniture plans to build a Wide Wall Mounted Desk? Leave a comment below.

Originally posted 2016-04-06 08:00:16.

5 Comments

Leave a Reply to Build a Pottery Barn Inspired Reed Wall Desk | Designs by Studio C Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.