Build a Low-Slung Chair

Plans for an Outdoor Wooden Chair

With Fall just around the corner, I have created the perfect plans to build a low slung chair for relaxing by the fire pit, outdoor movie night, or even as seating for a game room! If you are nervous about attempting to build a chair, don’t be… Chairs are one of the easiest pieces of furniture to construct and once you build your first one, you will be addicted – like me! The chair is designed to be constructed of straight off-the-shelf lumber. If it is going to be used and left outdoors, make sure the lumber is either chemically treated, sealed with spar varnish, or painted with exterior paint. This way the chair will last for many relaxing moments by the fire! A basic knowledge of sewing a straight line is helpful to construct pillows for the seat and back. In fact, using outdoor fabric for the covers, and stuffing made using recycled plastic bags would be the perfect cushioning! (See my post How to Make Outdoor Cushions Using Recycled Plastic Bags.) If you are a beginner, don’t be afraid to jump right in!

build low slung chair_Copy

Materials:

  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies

Lumber:

  • 2 – 2×4 at 8′
  • 1 – 4×4 post at 8’**

Cut List:

  • 2 – 4×4 posts at 10″ – Front Legs
  • 2 – 4×4 posts at 10-3/4″ – Lower Back Legs
  • 2 – 4×4 at 15″ – Upper Back Legs
  • 3 – 2×4 at 24″ – Front & Back Stretchers
  • 2 – 2×4 at 22″ – Side Stretchers
  • 1 – 3/4″ plywood at 26-1/2″ x 30″ – Seat
  • 1 – 3/4″ plywood at 13-1/2″ x 24″ – Back

 build low slung chair

** 2 – 2x4s glued and screwed together face to face will also work. If using this method, the side stretchers will have to be lengthened by 1″.

Step One

Cut the pieces for the front legs and stretcher. Set the pocket hole jig for drilling into 1-1/2″ material and drill pocket holes at each end of the stretcher. Secure to the legs using glue and 2-1/2″ pocket hole screws. Position the stretcher so that the front face is set back 1/4″ from the front face of the legs.
wood chair plans - low slung_Front Frame

Step Two

Cut the pieces for the upper and lower back legs. Cut a 5 degree angle in the lower edge of the upper back leg. Because the post is wider than a regular pocket hole jig allows for, drill pocket holes in each side of the angled portion of the legs (see the drawings). This will make the back extra sturdy so it doesn’t come apart when it is leaned on! Secure the upper and lower legs to each other using glue and 2-1/2″ pocket hole screws.
wood chair plans - low slung_Back Legs 1

wood chair plans - low slung_Back Legs 2

Step Three

Cut the pieces for the back stretchers and drill pocket holes in each end of each piece. Secure to the legs as shown using glue and 2-1/2″ pocket hole screws.
wood chair plans - low slung_Back Frame

Step Four

Cut the pieces  for the side stretchers and drill pocket holes in each end of each piece. Secure to the legs as shown using glue and 2-1/2″ pocket hole screws. Position the stretchers so that the outside face is 1/4″ back from the outside face of the legs.

wood chair plans - low slung_Side Stretchers

Step Five

Cut the piece for the seat. Cut the notches using a jigsaw or a bandsaw, then attach to the seat frame using glue and 1-1/4″ brad nails.
wood chair plans - low slung_Seat 1

wood chair plans - low slung_Seat 2

Step Six

Cut the piece for the back. Set the pocket hole jig for 3/4″ material and drill pocket holes in all four edges. Insert the piece into the upper back on top of the seat then secure using glue and 1-1/2″ pocket hole screws. The front face of the back will be flush with the front face of the back legs.
wood chair plans - low slung_Chair Back

Finish as desired. Sew a couple of pillows for the seat and back, and voila!! Awesome seating! Build one or build several… These plans to build a low-slung chair are just the ticket for indoor or outdoor use! I plan on building a few for myself! Any questions? Let me know at cher {at} designsbystudioc {dot} com!

Originally posted 2013-09-13 08:00:31.

9 Comments

Leave a Reply to Low Slung Chair – Free Woodworking Plan.com Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.