Repair the Top of a Dresser and Add Trim to the Edges

Repairing a Damaged Dresser Top

Hey there! So, I’ve had this dresser for a little while now and even though I covered it with a super heavy-duty tarp (you know, the kind they use to cover lumber at the home improvement store), the top veneer still got pretty messed up. I’m kind of embarrassed to admit it, but I actually built this dresser myself…oops! But, I had a really cool idea to fix up the top and add some fancy trim to the edges instead of using boring old edge banding. And let me tell you, this project is definitely one of my favorites (right up there with the Raphael Dresser)!

Repair the Top of a Dresser and Add Pieced Trim to the Edges

I bought a package of scrap moulding at Hobby Lobby (actually, I bought several packages) because I thought it would add interest to the dresser with “pieced” or “patchwork” trim around the top. This worked out so well, I can’t wait to add pieced trim to another project!

I started by removing the damaged veneer from the top with a scraper. Then I decided to remove the top layer of the plywood since it was slightly damaged as well. This would also allow me to put a new piece of 1/4″ plywood on the top and keep the thickness at 3/4″ so the scrap moulding would fit along the edge properly. I used a prybar (<– affiliate link!) to remove the plywood layer and it peeled away very easily.

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Removing Ply on Top

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Top with Ply Removed

I sanded the remaining plywood on the top as well as the edges to remove any adhesive from the edge banding. I cut a piece of 1/4″ plywood to fit the top (twice because “someone” can’t do simple math) then secured it in place with glue, clamps and 5/8″ staples which can be filled later. Ideally, contact cement would be better so that staples wouldn’t have to be used. If the 1/4″ piece is slightly bigger, a router with a straight bit can be used to cut the piece flush with the existing top. I got too excited and forgot to photograph this step…

Next, I added the strips of moulding along the front and sides. I centered the first piece, making marks on the top so that I had it in the correct position, then glued it in place with DAP® Weldwood Instant Adhesive (this stuff is the BOMB!). I added strips of moulding on either side and when I got to the corners, I cut miters in the pieces with the miter saw to go around the corner then continued adding strips.

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Trim & Adhesive

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Centered Front Trim

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Fitting Side Trim

Once I had the front and side edges covered, I used a sander with 220 grit sandpaper to knock down any high spots where the trim pieces butted against each other. It made the transitions “flow” better…

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Mitered Corner

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Sides Sanded

I stained the top and the feet using a wood stain and sealer in one (that has since been discontinued – BOO!) in a dark brown color, then painted the body and drawer fronts of the dresser. I think the hardest part of this project was picking a paint color! I chose Deep Amazon by Clark+Kensington.

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Front View

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Angled Front View

Repair the Top of a Dresser and Add Pieced Trim to the Edges - Top View

The top of this dresser was severely damaged. I removed the veneer and the first layer of the plywood then replaced it with 1/4

I’m so glad I decided to repair the top of the dresser and add pieced trim to the edges – I love the way it came out! This is the perfect way to cover exposed edges of plywood and I plan on doing it to many future projects. Have any questions about how to do it? Leave a comment below!

Originally posted 2016-07-08 08:00:29.

2 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.