Here are another set of plans perfect for reclaimed wood or new wood with an “old” finish on it! Large and in charge with a shelf underneath, it is sure to satisfy any entertaining needs!

Joss & Main Inspired Hammery Luberon Coffee Table

Materials:

• 1-1/2″ pocket hole screws
• 2-1/2″ pocket hole screws
• 1-1/2″ screws
• Finishing supplies

Lumber:

• 1 – 1×3 at 6′
• 3 – 2×2 at 8′
• 4 – 2×6 at 8′
• Half sheet of 3/4″ plywood

Cut List:

• 4 – 2×6 at 16-1/2″ – Legs
• 2 – 2×2 at 21″ – Stretchers
• 2 – 2×2 at 29″ – Stretchers
• 2 – 1×3 at 32″ – Outer Stretchers
• 1 – 3/4″ plywood at 29″ x 29″ – Shelf
• 7 – 2×6 at 38-1/2″ – Top
• 4 – 2×2 at 41-1/2″ – Top Edging

Click on the drawings for a larger view!

1. Cut the pieces for the legs and stretchers. Drill pocket holes in the top edge of the legs, as well as both ends of the 2×2 stretchers. Position the stretchers as shown, and secure using glue and 2-1/2″ pocket hole screws. Position the outer stretchers and secure to the legs using glue and 1-1/2″ countersunk screws through the stretchers into the outside.

2. Cut the piece for the shelf and drill pocket in all four bottom edges. Position as shown and secure using glue and 1-1/2″ pocket hole screws. The outside face of the shelf will be flush with the top edge of the stretchers.

3. Cut the pieces for the top. The top can either be assembled by drilling pocket holes as shown, or by edge gluing the pieces together and using metal mending strips on the underside. Pocket holes will still have to be drilled at each end of each piece to attach the trim.

Cut the pieces for the top trim and cut 45 degree miters at each end. Attach to the top panel using glue and 2-1/2″ pocket hole screws. Pocket holes can be drilled in the mitered edges or corner brackets can be used to keep the corners together.

Attach the top with 2-1/2″ pocket hole screws through the legs into the underside of the top.

Finish as desired!

Have a request for a plan? Contact me at cher {at} designsbystudioc {dot} com or designsbystudioc {at} gmail {dot} com. I would love to create a plan for you!

Until next time,

Happy Creating!