Mustache Candleholder

How to Make a Wood Mustache Candleholder

My teenage daughter is obsessed with mustaches… Actually, I’ve seen them everywhere – on t-shirts, duct tape, even shoe laces! I have to admit that they are quite quirky! I was experimenting with the band saw one day and cut out a cute mustache for her. Since it was so much fun, I’ve become a little obsessed with them myself! So today, I’ll show you how to make make a wood mustache candleholder!

How to Make a Wood Mustache Candleholder 1

Materials:

  • Scrap 2×4 or 4×4 lumber
  • Cardstock (for pattern)
  • Paint & Sandpaper

Start by cutting a pattern out of the cardstock. I used my Silhouette Cameo to cut a perfectly sized mustache without too many curves!

How to Make a Wood Mustache Candleholder 2

Trace the pattern on the lumber.

How to Make a Wood Mustache Candleholder 3

Use a bandsaw or jigsaw to cut out the mustache.

How to Make a Wood Mustache Candleholder 4

How to Make a Wood Mustache Candleholder 5

Use a drill press fitted with a 1-7/8″ Forstner bit and drill a shallow hole to hold a tealight candle if the mustache has been cut out of a 4×4 post. Otherwise, just leave it as is.

How to Make a Wood Mustache Candleholder 6

Thoroughly sand – start with 100 grit, then 150 grit, then 220 grit. Paint or finish as desired, then sand the edges for a “worn” look.

How to Make a Wood Mustache Candleholder 7

What do you think? Are you a little obsessed too??

These candleholders make great gifts or as a piece to hang on the wall! Several can be made in just a few hours out of scrap wood… Have any questions on how to make a wood mustache candleholder? Leave a comment below or contact me at cher {at} designsbystudioc {dot} com!

Sharing with Sawdust Girl’s Sawdust Throwdown