DIY Vintage Table Plans

Build a Furniture Piece with Lots of Charm

Finding that perfect antique-style table is not always easy but with these DIY vintage table plans, you can build your own! This particular table is big on storage featuring two drawers and two cubbies perfect for storing books or displaying that perfect vase! However you choose to use it, it will be a fabulous addition to your decor!

diy vintage table plans_Copy

Materials:

  • 1-1/4” pocket hole screws
  • 1-1/4” brad nails
  • Edge banding, optional (<– affiliate link!)
  • 2 – Cabinet pulls
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)
  • Paste wax

Lumber:

  • 1 – 1×2 at 6′
  • 1 – 2×2 at 4′ (or scraps for legs)
  • 1 sheet of 3/4″ plywood

Cut List:

  •  4 – 2×2 at 4″ – Base Legs
  • 2 – 1×2 at 15″ – Base Frame
  • 2 – 1×2 at 19″ – Base Frame
  • 2 – 3/4″ plywood at 18″ x 22″ – Bottom & Top
  • 2 – 3/4″ plywood at 18″ x 28-1/2″ – Sides
  • 1 – 3/4″ plywood at 20-1/2″ x 28-1/2″ – Back
  • 1 – 3/4″ plywood at 15-1/2″ x 17-1/4″ – Divider
  • 2 – 3/4″ plywood at 17-1/4″ x 20-1/2″ – Shelves
  • 2 – 3/4″ plywood at 15-3/4″ x 18-3/4″ – Drawer Bottoms
  • 4 – 3/4″ plywood at 5-5/8″ x 15-3/4″  – Drawer Sides
  • 4 – 3/4″ plywood at 5-5/8″ x 20-1/4″ – Drawer Front & Back

diy vintage table plans

 

Notes About the Project:

If using edge banding, it will be applied to the exposed edges of the plywood prior to assembly. The finishing will be much easier if the pieces are thoroughly sanded prior to assembly. Any exposed pocket holes can be filled using wood filler or Dry Dex, then sanded smooth.

Step One

Cut the pieces for the base. With the pocket hole jig set for 3/4″ material, drill pocket holes at each end of the frame pieces. Attach the frame pieces to the legs using glue and 1-1/4″ pocket hole screws.

 diy vintage table plans_Base

Step Two

Cut the piece for the bottom. Secure to the base frame using glue and 1-1/4″ brad nails.

 diy vintage table plans_Bottom

Step Three

Cut the pieces for the sides and drill pocket holes in the top and bottom edges. Secure to the bottom using glue and 1-1/4″ pocket hole screws.

 diy vintage table plans_Sides

Step Four

Cut the piece for the back and drill pocket holes in all four edges. Secure to the sides and bottom using glue and 1-1/4″ pocket hole screws.

 diy vintage table plans_Back

Step Five

Cut the piece for the top. Secure to the sides and back using glue and 1-1/4″ pocket hole screws.

diy vintage table plans_Top

Step Six

Cut the pieces for the divider and shelves. Drill pocket holes in the top and bottom edges of the divider, as well as the sides and back of each shelf. Assemble the pieces as shown using glue and 1-1/4″ pocket hole screws. Position inside the cabinet as shown, then secure using glue and 1-1/4″ pocket hole screws.

 diy vintage table plans_Shelf 1

diy vintage table plans_Shelf 2

Step Seven

Cut the pieces for the drawer boxes. Drill pocket holes in all four edges of the bottom pieces, as well as each end of the sides. Assemble the drawers as shown. There will be a 1/8″ gap at the sides and top of the drawers in the openings.

 diy vintage table plans_Drawer BS

diy vintage table plans_Drawer FB

 

diy vintage table plans_Drawer Fronts

 

Finish as desired. Apply a coat of paste wax to the bottom of the drawers so they will slide easily. Install the cabinet pulls.

Once again, these DIY vintage table plans are easy and perfectly suited for all skill levels from those who have just started woodworking to those who have been doing it forever! If you have questions or need help with the plans, contact me at cher {at} designsbystudioc {dot} com!

Originally posted 2013-10-30 08:00:22.

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.