Build a Luna Dining Table

DIY Plans to Build a Luna Dining Table with a Floating Top!

I love tables. In fact, I have so many tables in my house that I have been banned by the family from building any more – there just isn’t any room! This table is one I will secretly add to my “to build” list… The plans to build a Luna Dining Table feature tapered legs and a floating top, and is quite the inexpensive build! It is another quick and easy build – that’s how I roll!

Plans to Build a Luna Dining Table-Copy

Materials:

  • 2-1/2″ pocket hole screws
  • 1-1/4″ brad nails
  • Edge banding, optional
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)

Lumber:

  • 2 – 1×2 at 6′
  • 2 – 1×2 at 8′
  • 2 – 2×3 at 6′
  • 2 – 2×3 at 8′
  • 4 – 3×3 posts at 3′
  • 1 sheet of 3/4″ plywood

Cut List:

  • 4 – 3×3 posts at 28-1/2″ – Legs
  • 2 – 2×3 at 65″ – Frame
  • 4 – 2×3 at 41″ – Frame & Supports
  • 2 – 1×2 at 68″ – Spacers
  • 4 – 1×2 at 41″ – Spacers
  • 1 – 3/4″ plywood at 46″ x 70″ – Top

Plans to Build a Luna Dining Table

Click on the drawings for a larger view!

Step One

Cut the pieces for the legs. There will be a taper cut on two adjoining faces of each leg. Cut the tapers using a jigsaw or a tapering jig on the table saw.

Plans to Build a Luna Dining Table-Legs

Step Two

Cut the pieces for the frame and supports. With the pocket hole jig set for 1-1/2″ material, drill pocket holes in each end of each piece. Assemble the frame as shown, securing the pieces to the legs using glue and 2-1/2″ pocket hole screws. Orient the pocket holes so they face down, and the tapers on the legs will all face to the inside.

Plans to Build a Luna Dining Table-Frame

Plans to Build a Luna Dining Table-Supports

Step Three

Cut the pieces for the spacers. Secure the spacers to the frame and supports using glue and 1-1/4″ brad nails. The back edge of the spacers will be flush with the back edge of the frame, while the middle spacers will be centered on the supports.

Plans to Build a Luna Dining Table-Spacers

Step Four

Cut the piece for the top and apply edge banding, if desired. Secure the top to the spacers using glue and 1-1/4″ brad nails. The edges of the top will be flush with the sides of the framing pieces.

Plans to Build a Luna Dining Table-Top

Finish as desired!

The table can be lengthened to suit any needs by adding to the length of the longer framing pieces, the longer spacers, and the top. A few more supports will have to be added, as well. This table would be great either painted, stained, or left natural! Any questions about the plans to build a Luna Dining Table? Leave a comment below or contact me at cher {at} designsbystudioc {dot} com!




Build Kevin’s Space Saving Table and Stools

DIY Plans to Build a Space Saving Table and Stools

I was contacted by Kevin who asked me to create a plan based on a table with space underneath for storing the matching stools. The table is on casters, features a drop-leaf at the back edge of the top and an additional leg that swings out to support the leaf, as well as two drawers in the front for storage. Small towel bars can also be added the the sides. Kevin’s plans to build a space saving table and stools are easy to construct, and can be completed in a weekend!

Plans to Build a Space Saving Table and Stools-Copy

Plans to Build a Space Saving Table and Stools-Copy 2

Materials:

  • 1-1/4″ pocket hole screws
  • 2-1/2″ pocket hole screws.
  • 1-1/4″ brad nails
  • 1-1/4″ screws
  • Edge banding, optional
  • 5 hinges
  • 2 sets of 12″ Drawer slides
  • 2 Cabinet pulls
  • 5 – 2″ casters
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)

Lumber:

  • 2 – 1×2 at 8′
  • 2 – 1×3 at 8′
  • 1 – 1×3 at 6′
  • 5 – 2×2 at 8′
  • 1 sheet of 3/4″ plywood

Cut List:

  • 5 – 2×2 at 29-1/4″ – Legs
  • 2 – 1×4 at 12″ – Sides
  • 2 – 1×2 at 12″ – Spacer
  • 1 – 3/4″ plywood at 15″ x 30″ – Bottom
  • 2 – 1×2 at 28-1/2″ – Divider Frame
  • 1 – 1×2 at 12″ – Divider Frame
  • 2 – 1×4 at 13-1/8″ – Back Stretchers
  • 2 – 3/4″ x 3/4″ square strips* at 13-1/8″ – Front Stretchers
  • 4 – 1/2″ x 3/4″ strips*** at 13-1/2″ – Seat Slides
  • 2 – 3/4″ plywood at 17″ x 32″ – Top
  • 2 – 1×2 at 29-1/4″ – Support Frame
  • 3 – 1×2 at 13-1/8″ – Support Frame
  • 2 – 3/4″ plywood at 10-1/2″ x 10-5/8″ – Drawer Box Bottoms
  • 4 – 1×3 at 10-1/2″ – Drawer Box Sides
  • 4 – 1×3 at 12-1/8″ – Drawer Box Front & Back
  • 2 – 3/4″ plywood at 3-3/8″ x 12-7/8″ – Drawer Fronts

* These pieces can be scraps of plywood ripped on the table saw. They will be hidden by the top and the drawer fronts.

***These pieces should be ripped from solid wood and will not be hidden.

For the Stools:

Materials are listed to build two stools

  • 8 – 2×2 at 19-1/4″ – Legs
  • 4 – 1×3 at 12″ – Side Frames
  • 4 – 2×2 at 12″ – Side Frames
  • 4 – 1×3 at 8-3/4″ – Side Stretchers
  • 4 – 2×2 at 8-3/4″ – Side Stretchers
  • 2 – 3/4″ plywood at 13″ x 15″ – Stool Seats

Plans to Build a Space Saving Table and Stools

Click on the drawings for a larger view!

Step One

Cut the pieces for the table legs and side frames. With the pocket hole jig set for 3/4″ material, drill pocket holes in each end of the frame pieces. Secure to the legs using glue and 1-1/4″ pocket hole screws. The outside face of the frame pieces will be flush with the outside face of the legs.

Cut the pieces for the spacers. Secure the spacers to the side frame pieces using glue and 1-1/4″ countersunk screws. The bottom edges of the supports will be flush with the bottom edges of the sides.

Plans to Build a Space Saving Table and Stools-Sides

Plans to Build a Space Saving Table and Stools-Spacer

Step Two

Cut the piece for the bottom and cut the notches as shown. Use a portable pocket hole jig to drill pocket holes in the notches as shown. Secure to the bottom edge of the legs using glue and 1-1/4″ pocket hole screws. The bottom face will be flush with the bottom of each leg.

Plans to Build a Space Saving Table and Stools-Bottom 1

Plans to Build a Space Saving Table and Stools-Bottom 2Step Three

Cut the pieces for the divider frame. Drill pocket holes in each end of the frame piece. Set the pocket hole jig for 3/4″ material and drill pocket holes in the lower edge of each leg. Secure the frame piece to the legs as shown using glue and 1-1/4″ pocket hole screws. Secure the legs to the bottom using glue and 1-1/4″ pocket hole screws.

Plans to Build a Space Saving Table and Stools-Divider Frame 1

Plans to Build a Space Saving Table and Stools-Divider Frame 2Step Four

Cut the pieces for the back stretchers. Set the pocket hole jig for 3/4″ material and drill pocket holes in each end. Secure to the legs and divider frame using glue and 1-1/4″ pocket hole screws.

Plans to Build a Space Saving Table and Stools-Back Stretchers

Step Five

Cut the pieces for the front stretchers. Drill one pocket hole in each edge, and secure to the legs and divider as shown, locating the pieces 3/4″ back from the front edge, using glue and 1-1/4″ pocket hole screws.

Cut the pieces for the seat slides. Secure to the legs and divider as shown using glue and countersunk 1-1/4″ screws. (The 1/2″ edge will be horizontal)

Plans to Build a Space Saving Table and Stools-Front Stretchers

Plans to Build a Space Saving Table and Stools-Seat SlidesStep Six

Cut the pieces for the top. The top on the frame will overhang all edges by 1″. Secure one piece to the frame using glue and 1-1/4″ brad nails.

Install the casters on the bottom of the legs according to the manufacturer’s instructions. Set the remaining caster aside for the support frame.

Plans to Build a Space Saving Table and Stools-Top

Plans to Build a Space Saving Table and Stools-CastersStep Seven

Cut the pieces for the support frame and drill pocket holes in each end of the shorter pieces. Assemble the frame as shown using glue and 1-1/4″ pocket hole screws. Install the remaining caster. Attach the frame to the divider frame using two of the hinges. The outside edge of the frame will be flush with the divider leg, which makes the frame approximately 3/4″ longer than the back when folded in.

Plans to Build a Space Saving Table and Stools-Support Frame 1

Plans to Build a Space Saving Table and Stools-Support Frame 2

Step Eight

Install the hinges on the drop leaf, then install the drop leaf on the back edge of the top, over the support frame.

Plans to Build a Space Saving Table and Stools-Drop Leaf

Step Nine

Cut the pieces for the drawer boxes. Drill pocket holes in all four edges of the bottom as well as each end of the sides. Assemble the drawer box as shown using glue and 1-1/4” pocket hole screws. Install the drawer slides according to the manufacturer’s installation instructions, locating them ¾” back from the front edge of the sides. For an easy tutorial, click here. Make any necessary adjustments.

Plans to Build a Space Saving Table and Stools-Drawer BS

Plans to Build a Space Saving Table and Stools-Drawer FBStep Ten

Cut the pieces for the drawer fronts. Mark the position for the drawer pulls and drill the holes. Shim the drawer front in the opening – there will be a 1/8” gap around all sides – then drive screws through the holes for the drawer pulls into the drawer box. Open the drawer, and secure the drawer front using countersunk 1-1/4” screws from the inside. Remove the screws from the holes for the drawer pull then finish drilling the holes. Install the drawer pull. For an easy tutorial on installing drawer fronts, click here.

Plans to Build a Space Saving Table and Stools-Drawer Fronts

To Build the Stools:

Step One

Cut the pieces for the legs and side frames. With the pocket hole jig set for 3/4″ material, drill pocket holes in each end of the 1×3 frame pieces. Set the pocket hole jig for 1-1/2″ material and drill pocket holes in each end of the 2×2 pieces. Secure the frame pieces to the legs using glue and the appropriate screw for the material thickness – 1-1/4″ pocket hole screws for the 1x material and 2-1/2″ pocket hole screws for the 2x material.

Plans to Build a Space Saving Table and Stools-Stool Sides

Step Two

Cut the pieces for the stretchers. With the pocket hole jig set for 3/4″ material, drill pocket holes in each end of the 1×3 frame stretchers. Set the pocket hole jig for 1-1/2″ material and drill pocket holes in each end of the 2×2 stretchers. Secure the frame pieces to the legs using glue and the appropriate screw for the material thickness – 1-1/4″ pocket hole screws for the 1x material and 2-1/2″ pocket hole screws for the 2x material. A close quarter drill or right angle drill attachment may be required if the space is too tight.

Plans to Build a Space Saving Table and Stools-Stool Stretchers

Step Three

Cut the pieces for the seats. The seats will overhang each of the longer sides by 5/8″ so it can be hung on the seat slides on the table frame. Secure the seats in place using glue and 1-1/4″ brad nails.

Plans to Build a Space Saving Table and Stools-Stool Seat

Finish as desired.

This would be the perfect set not only for a small space, but for a time when extra seating and eating space is needed for guests! It would also be great in a finished basement or in a sunroom! Have any questions about the plans to build a space saving table and stools or have a request of your own? Contact me at cher {at} designsbystudioc {dot} com!




Build a Shelby Dining Table

A Gorgeous Dining Table to Build Using the Shelby Dining Table Plans

What a beautiful table! With the rustic leg bases and large top, you can build a beautiful table suitable for a large family or fabulous dinner party using the Shelby Dining Table plans!

 shelby dining table plans_Copy

Materials:

  • 2-1/2″ pocket hole screws
  • 1-1/4″ brad nails
  • 2″ screws
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)

Lumber:

  • 3 – 1×2 at 8′
  • 1 – 1×4 at 8′
  • 7 – 2×4 at 8′
  • 1 – 4×4 at 6′
  • 1 sheet of 3/4″ plywood

Cut List:

  • 2 – 4×4 at 30-1/4″ – Base Post
  • 16 – 2×4 at 18″ – Base Legs
  • 8 – 1×4 at 8″ – Base Leg Feet
  • 16 – 2×4 at 17-11/16″ – Angled Supports
  • 1 – 3/4″ plywood at 40-1/2″ x 89″ – Top
  • 2 – 1×2 at 40-1/2″ – Top Trim
  • 2 – 1×2 at 90-1/2″ – Top Trim

 shelby dining table plans

Click on the drawings for a larger view!

Step One

Cut the pieces for the base posts, the legs, and the feet. With the pocket hole jig set for 1-1/2″ material, drill pocket holes in one end of each leg piece. Use a sander and coarse sandpaper to sand a rounded edge on the opposite side at the opposite end of the pocket holes.

Secure the 1×4 feet on the bottom of eight of the legs using glue and 1-1/4″ brad nails. These will be the lower legs. Secure the lower legs to the posts locating them 3/4″ up from the bottom of the posts using glue and 2-1/2″ pocket hole screws.

 shelby dining table plans_Legs

shelby dining table plans_Lower Legs

Step Two

Secure the upper legs to the posts using glue and 2-1/2″ pocket hole screws. The back face of the legs will be flush with the top face of the posts.

 shelby dining table plans_Upper Legs

Step Three

Cut the pieces for the angled supports and cut a 45 degree angle in each end. Secure to the posts and legs as shown using glue and toenailed 2″ screws.

 shelby dining table plans_Angled Supports 1

shelby dining table plans_Angled Supports 2

Step Four

Cut the pieces for the top and the top trim. The trim will be secured to the edges of the top using glue and 1-1/4″ brad nails. One edge of the trim pieces will be flush with the top face of the table top.

Secure the top to the bases using countersunk 2″ screws. Do not use glue! This will make it easier to move the table as needed!

 shelby dining table plans_Top

shelby dining table plans_Secure Bases

Finish as desired.

Awesome, huh? The table you can build from the Shelby Dining Table plans can be finished however you desire and if constructed using suitable materials, it would be an excellent addition for outdoor use! Contact me at cher {at} designsbystudioc {dot} com!




Build an Elongated Hexagon Table

Free Furniture Plans to Build an Elongated Hexagon Table

Previously, I shared plans for a regular hexagon table. Now, I am sharing free furniture plans to build an Elongated Hexagon Table. This table is perfect for a large, open space and will seat several! It would be a fabulous addition to a large family gathering or dinner party!

free furniture plans build elongated hexagon table_Copy

Materials:

Lumber:

  • 8 – 1×3 at 6′
  • 2 – 2×2 at 6′
  • 1 sheet of 3/4″ plywood

Cut List:

  • 6 – 2×2 at 29-1/4″ – Legs
  • 2 – 1×3 at 65-1/4″ – Aprons
  • 2 – 1×3 at 43″ – Aprons
  • 2 – 1×3 at 66-3/4″ – Top Supports
  • 2 – 1×3 at 11-3/8″ – Stretchers
  • 4 – 1×3 at 25-3/4″ – Angled Aprons
  • 1 – 3/4″ plywood at 48″ x 96″ – Top

free furniture plans build elongated hexagon table

Notes:

Edge banding will be applied to the exposed edges of the plywood prior to assembly.

 

Step One

Cut the pieces for the legs. Cut the taper using a jigsaw, bandsaw, or tapering jig on the table saw.

 free furniture plans build elongated hexagon table_Legs

Step Two

Cut the pieces for the aprons. With the pocket hole jig set for 3/4″ material, drill pocket holes in each end of the apron pieces. Assemble the table frame as shown – the tapers of the legs will face each other at the shorter sides – using glue and 1-1/4″ pocket hole screws. The outside face of each apron will be flush with the outside face of the legs.

 free furniture plans build elongated hexagon table_Aprons

Step Three

Cut the pieces for the center supports and drill pocket holes at each end. Secure to the longer stretchers using glue and 1-1/4″ pocket hole screws.

 free furniture plans build elongated hexagon table_Top Supports

Step Four

Cut the pieces for the stretchers and drill pocket holes at each end. Secure the stretchers to the outside of the longer aprons as well as the two remaining legs using glue and 1-1/4″ pocket hole screws. The taper for the legs will face in toward the long stretchers.

 free furniture plans build elongated hexagon table_Stretchers

Step Five

Cut the pieces for the angled aprons. I have given the measurement as well as the degree for each angle. When attaching to the table frame, the 30 degree angled side will attach to the leg with the short stretcher and the 60 degree angled side will attach to the corner leg. Attach the aprons with glue and 1-1/4″ brad nails.

 free furniture plans build elongated hexagon table_Angled Aprons 1

free furniture plans build elongated hexagon table_Angled Aprons 2

Step Six

Cut the piece for the top. Spread glue along the top supports, the aprons, the stretchers, and the legs and position the top so that it overhangs by 1″ on all sides. Secure to the frame using glue and 1-1/4″ brad nails.

 free furniture plans build elongated hexagon table_Top 1

free furniture plans build elongated hexagon table_Top 2

Finish as desired!

I love these free furniture plans to build an Elongated Hexagon Table. It is a great choice for those new to woodworking! Do you have a request for plans? Contact me at cher {at} designsbystudioc {dot} com!

Disclaimer:

This post contains links to a site of which I am an affiliate. What that means is if the link is clicked and a purchase is made, I will get a commission of that sale. Rest assured I would only direct my readers to sites I shop at myself!




Build a Hexagon Table

Free Furniture Plans to Build a Hexagon Dining Table

Here is a nifty table that doesn’t take up a lot of space yet you can seat more people… These free furniture plans to build a Hexagon Dining Table are simple to follow and won’t break your budget. Finished in a variety of options, this table will be a hit at the family dinner or even the next dinner party!

free furniture plans build hexagon dining table_Copy

Materials:

  • 1-1/4″ pocket hole screws
  • 1-1/4″ brad nails
  • Edge banding, optional
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)

Lumber:

  • 4 – 1×3 at 8′
  • 2 – 2×2 at 6′
  • 1 sheet of 3/4″ plywood

Cut List:

  • 6 – 2×2 at 29-1/4″ – Legs
  • 2 – 1×3 at 24-3/4″ – Aprons
  • 2 – 1×3 at 43″ – Aprons
  • 2 – 1×3 at 25-1/4″ – Top Supports
  • 2 – 1×3 at 11-3/8″ – Stretchers
  • 4 – 1×3 at 25-3/4″ – Angled Aprons
  • 1 – 3/4″ plywood at 48″ x 55-1/2″ – Top

 free furniture plans build hexagon dining table

Notes:

Edge banding will be applied to the exposed edges of the plywood prior to assembly.

 

Step One

Cut the pieces for the legs. Cut the taper using a jigsaw, bandsaw, or tapering jig on the table saw.

 free furniture plans build hexagon dining table_Legs

Step Two

Cut the pieces for the aprons. With the pocket hole jig set for 3/4″ material, drill pocket holes in each end of the apron pieces. Assemble the table frame as shown – the tapers of the legs will face each other at the shorter sides – using glue and 1-1/4″ pocket hole screws. The outside face of each apron will be flush with the outside face of the legs.

 free furniture plans build hexagon dining table_Aprons

Step Three

Cut the pieces for the center supports and drill pocket holes at each end. Secure to the longer stretchers using glue and 1-1/4″ pocket hole screws.

 free furniture plans build hexagon dining table_Top Supports

Step Four

Cut the pieces for the stretchers and drill pocket holes at each end. Secure the stretchers to the outside of the longer aprons as well as the two remaining legs using glue and 1-1/4″ pocket hole screws. The taper for the legs will face in toward the long stretchers.

 free furniture plans build hexagon dining table_Legs 2

Step Five

Cut the pieces for the angled aprons. I have given the measurement as well as the degree for each angle. When attaching to the table frame, the 30 degree angled side will attach to the leg with the short stretcher and the 60 degree angled side will attach to the corner leg. Attach the aprons with glue and 1-1/4″ brad nails.

 free furniture plans build hexagon dining table_Angled Aprons 1

free furniture plans build hexagon dining table_Angled Aprons 2

Step Six

Cut the piece for the top. Spread glue along the top supports, the aprons, the stretchers, and the legs and position the top so that it overhangs by 1″ on all sides. Secure to the frame using glue and 1-1/4″ brad nails.

 free furniture plans build hexagon dining table_Top 1

free furniture plans build hexagon dining table_Top 2

Finish as desired!

I love these free furniture plans to build a Hexagon Dining Table and may add it to my “to build” list just because! Do you have a request for plans? Contact me at cher {at} designsbystudioc {dot} com!




Build a Fabulous Truss Dining Table

The Castleton Dining Table Plans Will Help You Create a Gorgeous Piece of Furniture with Style!

Don’t you just love the rustic look of truss-style furniture? The Castleton dining table plans fit the bill perfectly! With striking elegance, this table will have a huge impact on style but not on the budget!

castleton dining table plans_Copy

Materials:

  • 2-1/2″ pocket hole screws
  • 2-1/2″ screws
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)

Lumber:

  • 2 – 2×3 at 6′
  • 3 – 2×3 at 8′
  • 1 – 2×4 at 4′
  • 3 – 2×4 at 8′
  • 7 – 2×6 at 8′
  • 2 – 4×4 at 6′

Cut List:

  • 4 – 4×4 posts at 30″ – Legs
  • 4 – 2×4 at 38-1/2″ – Upper Side Frame & Center Top Supports
  • 2 – 2×3 at 38-1/2″ – Lower Side Frame
  • 2 – 2×3 at 20-1/2″ – Center Side Frame
  • 4 – 2×3 at 26-3/16″ – Truss Supports
  • 4 – 2×4 at 12″ – Top Edge Boards
  • 2 – 2×4 at 45″ – Top Edge Boards
  • 3 – 2×3 at 45″ – Top Frame & Lower Stretcher
  • 7 – 2×6 at 76″ – Top Boards

castleton dining table plans

Step One

Cut the pieces for the legs and side frames. With the pocket hole jig set for 1-1/2″ material, drill pocket holes in each end of the frame pieces. The 2×4 upper frame pieces will be positioned 1-1/2″ down from the top edge of the legs. Secure in place using glue and 2-1/2″ pocket hole screws. The 2×3 lower frame pieces will be located on end with the back face flush with the inside face of the legs. Secure in place using glue and 2-1/2″ pocket hole screws. Position the center frame pieces and shown then secure in place using glue and 2-1/2″ pocket hole screws.

 castleton dining table plans_Leg Assemblies

Step Two

Cut the pieces for the truss supports. Cut 33 degree miters in each end as shown, then drill pocket holes noting that there will be a right and a left piece for each leg assembly. Secure to the frame pieces using glue and 2-1/2″ pocket hole screws.

 castleton dining table plans_Truss 1

castleton dining table plans_Truss 2

Step Three

Cut the pieces for the top edge boards. Drill pocket holes in one edge only of each of the shorter pieces and both edges of the longer pieces. Secure to the legs as shown using glue and 2-1/2″ pocket hole screws. The top face of these boards will be flush with the top end of the legs.

 castleton dining table plans_Top Edge Boards

Step Four

Cut the pieces for the top frame boards and drill pocket holes in each end. Secure to the legs as shown making sure they are snug against the top edge boards using glue and 2-1/2″ pocket hole screws. The inside edge will be flush with the inside face of the legs. Secure the center portion of the boards to the top edge boards using countersunk 2-1/2″ screws.

 castleton dining table plans_Top Frame

Step Five

Cut the pieces for the center top supports and drill pocket holes in each end. Secure to the top frame boards using glue and 2-1/2″ pocket hole screws.

 castleton dining table plans_Center Top Supports

Step Six

Cut the piece for the lower stretcher. Secure to the lower frame piece using glue and 2-1/2″ pocket hole screws.

castleton dining table plans_Stretcher

Step Seven

Cut the pieces for the top boards. Secure to the upper frame boards and center support boards using glue and countersunk 2-1/2″ screws through the underside.

 castleton dining table plans_Top Boards

Finish as desired.

The Castleton dining table plans will create one hefty piece of furniture! Wouldn’t it look fabulous with a dark stain? At any rate, this piece is perfect for those new to woodworking and would also be fabulous constructed from umber suitable to outdoor use!

Need help with the plans? Contact me at cher {at} designsbystudioc {dot} com!