Biltmore Cabinet Plans

A Beautiful Cabinet That Can Be Finished in a Variety of Ways

This cabinet is another one of those really easy projects that can be built quickly and inexpensively! The Biltmore cabinet plans feature two shelves inside and dual-hinged doors which makes it the perfect piece for storing linens, extra table settings, or even books and craft supplies!

Biltmore Cabinet Plans-Copy

Materials:

  • 1-1/4″ pocket hole screws
  • 5/8″ brad nails
  • 1-1/4″ brad nails
  • 4 sets of hinges (<– affiliate link)
  • 2 cabinet pulls
  • Wood glue
  • Sandpaper (100, 150, 220 grits)
  • Finishing supplies (primer & paint, or stain, sealer)

Lumber:

  • 1 – 1×2 at 6′
  • 4 – 1×2 at 8′
  • 1 – 1×3 at 4′
  • 1 – 2′ x 4′ sheet of 1/4″ plywood
  • 1 – 4′ x 4′ sheet of 1/4″ plywood
  • 1 sheet of 3/4″ plywood

Cut List:

  • 2 – 3/4″ plywood at 13-1/4″ x 41-1/2″ – Sides
  • 1 – 3/4″ plywood at 13-1/4″ x 40-1/2″ – Bottom
  • 2 – 3/4″ plywood at 13″ x 40-1/2″ – Shelves
  • 1 – 1/4″ plywood at 39-3/4″ x 41-1/2″ – Back
  • 1 – 3/4″ plywood at 14-1/4″ x 42″ – Top
  • 1 – 1×3 at 42″ – Lower Trim
  • 8 – 1×2 at 38-3/4″ – Door Stiles
  • 12 – 1×2 at 7-3/8″ – Door Rails
  • 2 – 1/4″ plywood at 8-3/8″ x 36-3/4″ – Door Panels

Biltmore Cabinet Plans

Click on the drawings for a larger view!

Step One

Cut the pieces for the sides and the bottom. With the pocket hole jig set for 3/4″ material, drill pocket holes in each end of the bottom piece. Secure to the sides as shown (positioning the piece 1-3/4″ up from the bottom edge of the sides) using glue and 1-1/4″ pocket hole screws.

Biltmore Cabinet Plans-Sides Bottom

Step Two

Cut the pieces for the shelves and drill pocket holes in each end. Secure to the sides as shown with the back edge flush with the back edge of the sides using glue and 1-1/4″ pocket hole screws.

Biltmore Cabinet Plans-Shelves

Step Three

Cut the piece for the back panel. Secure to the sides, shelves, and bottom using glue and 1-1/4″ pocket hole screws. The top edge will be flush with the top edge of the sides.

Biltmore Cabinet Plans-Back

Step Four

Cut the piece for the top. The front edge will overhang by 3/4″, and the back edge will be flush with the back panel. Secure in place using glue and 1-1/4″ brad nails.

Biltmore Cabinet Plans-Top

Step Five

Cut the piece for the lower trim. Mark the position of the arc and cut using a jigsaw or bandsaw. Secure the lower trim in place using glue and 1-1/4″ brad nails.

Biltmore Cabinet Plans-Lower Trim1

Biltmore Cabinet Plans-Lower Trim2

Step Six

Cut the pieces for the door frames. Drill pocket holes in each end of the shorter pieces. Assemble the frames as shown using glue and 1-1/4″ brad nails.

Biltmore Cabinet Plans-Doors1

Step Seven

Cut the pieces for the door panels. Secure in place, centered over the frame openings, using glue and 5/8″ brad nails.

Biltmore Cabinet Plans-Doors2

Step Eight

The center doors will be hinged to the outer doors so that they will fold when opened. Install the hinges on the doors, then install the hinges for the outer doors on the cabinet. Install the cabinet pulls in the desired position.

Biltmore Cabinet Plans-Doors3

Finish as desired!

The Biltmore cabinet plans are excellent as a first project and can be constructed in a weekend! This DIY linen storage cabinet would work well in a bathroom to store toiletries or clean towels, as well as in a bedroom to store clothing or shoes. The door panels can also be made of glass, Plexiglas, or punched aluminum. Have any questions about the plan? Leave a comment below or contact me at cher {at} designsbystudioc {dot} com!

Originally posted 2014-06-19 08:00:37.

6 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.